1. Scope of Application

This specification describes the outline dimensions, performance indicators, technical parameters and operation precautions for the IV-K01 all-in-one car jump starter with inflation & deflation air pump.

2. Power Supply Composition

Model	Cell Type	BMS Model	Inverter Type
All-in-One Car Jump Starter with Inflation and Deflation Air Pump	High-rate polymer lithium battery	-	-

3. Power Supply Performance Indicators

Item	Parameter	Index	Remarks
Battery Pack	Nominal Voltage (V)	-	-
	Nominal Capacity (Ah)	8Ah / 10Ah / 12Ah	8000mAh/10000mAh/12000mAh
	Minimum Capacity (Ah)	-	-
	Min Discharge Cut-off Voltage (V)	-	-
	Max Continuous Discharge Current (A)	300A	-
	Max Charging Voltage (V)	-	-
	Max Charging Current (A)	-	-
	Cycle Life	＞1000 次	-
		-
		-
		-
		-
	Internal Resistance(mΩ)	-	-
DC Input (Charging)	DC5521 Charging Port	-
	TYPE-C Charging Port	PD 45W，supporting 5V/3A、9V/3A、12V/3A、15V/3A、20V/2.25ATYPE-C PD100W Max
	Charging Time	-
AC Output	Output Interface	-	-
	Rated Voltage/Frequency	-	-
	Output Power	-	-
DC Output	Output Interface	Type-C、USB-A	-
DC Output	Output Power	Type-C PD 45W；USB-A 5V/2A	-
LED Light	Output mode	Emergency Constant Lighting	-
Wireless Charging (Optional)		-	-
USB Output	QC3.0	-	-
	TYPE-C	PD 45W 双向输出，支持 5V/3A、9V/3A、12V/3A、15V/3A、20V/2.25A PD 45W bidirectional output, supporting 5V/3A, 9V/3A, 12V/3A, 15V/3A, 20V/2.25A
	TYPE-C	-	-
Display		LED
Conversion Efficiency		-	-
Weight (Kg)		800g	-
Product Size (mm)		-	-
Color		Black、White	-
Protection		Over-charge / Over-discharge / Over-current / Short-circuit / Balance / Temperature Protection
Working Temp (℃)	Charge/Discharge	0℃~45℃	—
Working Temp (℃)	Optimal Temp	10℃~35℃	—
Storage Temp & Humidity	Short-term (≤1 month)	-20℃~50℃	Humidity: 65%±20% RH
	Short-term (≤1 month)	-20℃~50℃
	Short-term (≤3 months)	-20℃~35℃
	Short-term (≤12 months)	-20℃~25℃
	Long-term (＞12 months)	15℃~25℃
Heat Dissipation		Intelligent air cooling	Recover after 2h cooling at room temp

4. Panel Layout

No.	Name	No.	Name
1	Display screen	9	Digital Battery Indicator
2	Mains switch	10	Mode Switch Button
3	LED Light	11	Inflation Port
4	Type-C Bidirectional Charging & Discharging Port	12	Vacuum Suction Port
5	USB Output Port	13	Pressure Detection Module
6	Jump Starter Battery Clamp	14	Battery Protection Board
7	Air Pump Module	15	Lighting Control Button
8	Vacuum Suction Module	—	—

5. Battery Management System

The built-in lithium battery protection board can monitor the battery operation status in real time. It will cut off input and output for protection when over-charge, over-discharge, over-current, over-temperature occurs.

6. Transportation and Storage Precautions

For long-term storage, complete a charge-discharge cycle every 3 months. Do not drop during handling; stacking shall not exceed 4 layers; do not place upside down, keep front side upward.

7. Warnings and Notes

Please carefully read this specification and warning labels on the device before use. Improper operation may lead to overheating and damage of the unit. The company shall not be held responsible for any accidents resulting from non-compliant operations. Always follow the instructions for safe operation.

Warning

Keep the power supply away from heat sources and high-voltage places, avoid long-term direct sunlight exposure.
The product contains high-voltage components. Do not disassemble it privately to avoid safety accidents.
Do not put the power supply into water or fire.
Do not reverse the positive and negative poles of the power supply. Do not short-circuit the positive and negative poles with metal objects.
Avoid severe physical vibration and impact; do not hit, drop or step on the power supply.
Disassembly or assembly without manufacturer permission and guidance is strictly prohibited.
Do not use power supplies of different manufacturers, types and models in combination.

Note

The load equipment must meet two conditions for use: ① Input power < rated power of power supply; ② Starting power at boot < peak power of power supply.
The power supply will automatically activate protection and turn off output when low battery, excessive load power or over ambient temperature.
Please charge the power supply within 15 days after being exhausted.

Use matched or recommended professional lithium battery charger only.

Stop using immediately if abnormal conditions such as peculiar smell, discoloration, abnormal noise, liquid leakage or severe deformation occur.
If electrolyte leaks and splashes on skin or eyes, rinse with clean water immediately and seek medical treatment.
Place the power supply out of reach of pets and children; keep children away from the product.
It is forbidden to use multiple units in series or parallel connection. Please contact the manufacturer for consultation if series/parallel application is required.

8. Packing List

No.	Material Name	Unit	Quantity
1	All-in-One Car Jump Starter Main Unit	PCS	1
2	Upgraded Heavy-duty Battery Clamp	PCS	1
3	High-quality Original Type-C Charging Cable	PCS	1
4	Explosion-proof Braided Inflation Hose	PCS	1
5	Multi-nozzle Set (swimming ring nozzle, ball needle, quick-connect nozzle)	PCS	1
6	User Manual	PCS	1
7	12-protection Smart Battery Clamp	PCS	1

9. Certifications

This portable power station complies with CE, FCC, UN38.3, MSDS standards.

10. Safety Compliance

Designed per IEC62619 for lithium iron phosphate battery safety; built-in multi-protection circuits including over-charge, over-discharge, over-current, short-circuit and over-temperature protection to meet international safety requirements.

All-in-One Car Jump Starter with Inflation and Deflation Air Pump