Multi-Function Car Jump Starter Booster with Built-in Tire Inflator & Deflator Air Pump for Road Trip

1.    Scope of Application

This specification describes the outline dimensions, performance indicators, technical parameters and operation precautions for the IV-K02 all-in-one car jump starter with inflation & deflation air pump.

This 12V portable vehicle emergency power unit is equipped with integrated inflate/deflate air pump, 300-500A continuous jump start current, dual 30W PD Type-C & QC3.0 USB output, LED digital display for real-time tire pressure and power monitoring. It adopts lithium battery pack with optional 8Ah/10Ah/12Ah capacity, full BMS multi-protection system and intelligent air cooling structure, suitable for road rescue, tire inflation, outdoor camping and daily emergency power supply scenarios.

2.    Power Supply Composition

3.    Power Supply Performance Indicators                                        

4. Panel Layout

5. Battery Management System

The built-in lithium battery protection board can monitor the battery operation status in real time. It will cut off input and output for protection when over-charge, over-discharge, over-current, over-temperature occurs.

6. Transportation and Storage Precautions

For long-term storage, complete a charge-discharge cycle every 3 months. Do not drop during handling; stacking shall not exceed 4 layers; do not place upside down, keep front side upward.

7. Warnings and Notes

Please carefully read this specification and warning labels on the device before use. Improper operation may lead to overheating and damage of the unit. The company shall not be held responsible for any accidents resulting from non-compliant operations. Always follow the instructions for safe operation.

Warning

1. Keep the power supply away from heat sources and high-voltage places, avoid long-term direct sunlight exposure.
2. The product contains high-voltage components. Do not disassemble it privately to avoid safety accidents.
3. Do not put the power supply into water or fire.
4. Do not reverse the positive and negative poles of the power supply. Do not short-circuit the positive and negative poles with metal objects.
5. Avoid severe physical vibration and impact; do not hit, drop or step on the power supply.
6. Disassembly or assembly without manufacturer permission and guidance is strictly prohibited.
7. Do not use power supplies of different manufacturers, types and models in combination.

Note

1. The load equipment must meet two conditions for use: ① Input power < rated power of power supply; ② Starting power at boot < peak power of power supply.
2. The power supply will automatically activate protection and turn off output when low battery, excessive load power or over ambient temperature.
3. Please charge the power supply within 15 days after being exhausted.

Use matched or recommended professional lithium battery charger only.

1. Stop using immediately if abnormal conditions such as peculiar smell, discoloration, abnormal noise, liquid leakage or severe deformation occur.
2. If electrolyte leaks and splashes on skin or eyes, rinse with clean water immediately and seek medical treatment.
3. Place the power supply out of reach of pets and children; keep children away from the product.
4. It is forbidden to use multiple units in series or parallel connection. Please contact the manufacturer for consultation if series/parallel application is required.

8. Packing List

9. Certifications

This portable power station complies with CE, FCC, UN38.3, MSDS standards.

10. Safety Compliance

Designed per IEC62619 for lithium iron phosphate battery safety; built-in multi-protection circuits including over-charge, over-discharge, over-current, short-circuit and over-temperature protection to meet international safety requirements.